sorry but we can help if you will have an official API only

you can use some examples:

https://iridi.com/download/software/v3/#tab2

https://dev.iridi.com/Best_Practice

Recently, we have been making modules only according to the official API, but you can use unofficial examples in the project as well (Google shows many examples on request "Daikin AC API")

Hello

I found a couple of examples on the internet for an unofficial API for Daikin air conditioners, but we don't have access to the official API. You can make an AV&Custom-based driver in your project on your own.

Of course, all this applies only to the i3pro product, for i3lite we have no such plans.

Hello

We do not have a command to restart the server.

If necessary, you can use IR.EXECUTE to run a script on the system that will perform the necessary actions.
The reboot command is platform dependent.

I think it is better to ask this question to the manufacturer's representatives in your local market.

I think you can, but you need to configure your local server to send PUSH notifications to "wake up" the panel when you call. Our documentation contains examples of settings for some types of servers.

It seems to me that there is a misunderstanding.

How does SIP intercom works:

1. There is a SIP server (often it is inside an SIP intercom, but it can also be a separate SOFT (3CX, PBX, Asterisk etc). We do not supply a SIP server, but work with any SIP-compatible server.

2. There is a SIP intercom, which is a client of the server.

3. There is a SIP client (iRidium), which is also connected to the SIP server.

To work within the network, it is enough to use a server inside the intercom and connect iRidium to it.

To work via the Internet, it is necessary that the SIP server is accessible from the Internet, therefore, a third-party separate software SIP server is usually used.

This is a question for the manufacturer of the device for setting up an external SIP server in a specific model.

Our instructions have this at the very beginning: https://dev.iridi.com/SIP_Akuvox/en

To work remotely:

1. It is required to make the SIP server accessible from the outside (port forwarding or cloud server).

2. Set up PUSH notifications, as I wrote to you above.

3. Configure the SIP intercom to work with an external SIP server.

Only in this case you will have a completely remote mode of operation with the SIP intercom.

In what part of this work do you need documentation?

You can use documentation https://dev.iridi.com/CloudPush/en#Setting_up_of_SIP_Intercom