0
Answered

Clipsal test

Владислав Новиков 8 years ago in Products / Other drivers updated by Oksana (expert) 8 years ago 8

Доброго времени суток!


Я решил протестировать iRidium Server с системой Clipsal , в надежде увидеть какие-либо изменения.

Увидел - команды проходят очень быстро (управление светом, on/off и диммирование) но , возникла проблема с обратной связью. Готовый проект на версии 2.2.3 , отображает статусы светильников но, с большой задержкой и так же долго проходят команды. Запуская проект через новый бэта клиент, статус светильников не отображаеться вообще.

Я создал 5 графических объектов для тестирования с разными комбинациями отображения статусов. Для начала с привязаным к этим элементам одинаковым фидбэком, потом сделал много разных фидбэков со всевозможными опциями отображения статусов- не помогло.

В общем с отображением статуса светильников ничего не вышло.

После долгих тестов, я решил попробовать с термостатом. На удивление я получил один признак жизни - отобразилась текущая температура(моментально). К сожалению послать какие-либо значения на термостат закончились ни чем( в версии 2.2.3 по климатике была таже проблема , о которой я уже писал как пол года назад , если не больше).


Возможно я что-то делаю не так, подскажите пожалуйста как решить данную проблему.

Answer

Answer
Answered

Здравствуйте, Владислав


Поддержка драйверов Clipsal и Clipsal Gate не планируется в ближайшее время. В будущем (ориентировочно мне передали информацию, что летом) планируется выпустить модуль для управления на базе i3 Lite. В дальнейшем, этот модуль можно будет использовать в i3 pro.


The support of Clipsal and Clipsal Gate driver is not planned in i3 Pro in near future. In the future (presumably, in summer), we plan to release a module for i3 Lite for controlling Clipsal. After, this module will be avaliable for i3 Pro.

What does this mean in English please? Thanks :)

Hello Jackie,


Did you test your driver for Clipsal in i3 Pro? Do you have any result?

Hi Oksana,

Not yet but will do so in the next couple of weeks and let you know.

Thank you, Jackie! I will be wait your answer!

I`m testing Clipsal system with new iRidium Server at the moment. In couple words - First I tried to test how does Light Control work. I took one group of light and created many graphical elements with different feedbacks and commands. Commands did work instantaneously but , I haven`t received a single feedback from system, saying if the lights are on or off. ( in 2.2.3 version of iRidium everything worked fine but with a huge delay , that was the main problem and another problem with old version I could not control Climate. I`ve been trying a lot of combinations but nothing helped. Also I wrote a post about this problem earlier and it also haven`t been solved)

So after a lot of testing with the lights , I decided to test Climate control and the only feedback i received was the current temperature and that`s it .

+2

Hi

We have not had any issues with the iRidium Clipsal CGate driver with delays in feedback, it should be instant


Secondly, we have recently implemented Climate Control (Application 172 HVAC) in our own JAMware Clipsal CGate Driver for iRidium 2 (we have tested on 2.1 on-wards up to 2.2.3). This is a screen shot of my test program, it is showing the data from 2 Thermostats (PC_TSB5 and PCTSB)

You can get more information here: http://www.jamware.co.nz/iridiummobile/iridium-scripts-drivers.html#CGate

Answer
Answered

Здравствуйте, Владислав


Поддержка драйверов Clipsal и Clipsal Gate не планируется в ближайшее время. В будущем (ориентировочно мне передали информацию, что летом) планируется выпустить модуль для управления на базе i3 Lite. В дальнейшем, этот модуль можно будет использовать в i3 pro.


The support of Clipsal and Clipsal Gate driver is not planned in i3 Pro in near future. In the future (presumably, in summer), we plan to release a module for i3 Lite for controlling Clipsal. After, this module will be avaliable for i3 Pro.

Спасибо за ответ , ждем